GH3600 alloy is a nickel-chromium nickel-based corrosion resistant alloy.
The GH3600 alloy has satisfactory thermal strength and high plasticity below 800℃, and has good high-temperature corrosion resistance and oxidation resistance below 1000℃. The alloy has been used in stable tissue and has good cold and cold processing and welding properties and low temperature mechanical properties.
Alloys can be reinforced by cold machining or connected by resistance welding, soldering or brazing, suitable for engine combustion chambers working below 700-800℃ and oxidation-resistant parts below 1100℃ for low loads
Chemical composition
| Ni | Cr | Fe | Cu | Mn | C | Si | S |
| ≥72 | 14-17 | 6.0-1.0 | ≤0.5 | ≤1.0 | ≤0.15 | ≤0.5 | ≤0.015 |
apply
Evaporation tanks, acid and alkali industrial machines in petrochemical production, catalytic regenerator
Crankbottles and components in heat treatment furnace, especially in carbonization and nitride gases
Nuclear reactor power generation equipment, heat exchangers
Resistance to chlorine gas and fluorine gas corrosion: the production of organic or inorganic chlorides and fluoride
Chloride gas legal titanium dioxide
The field of production and use of corrosive alkali metals, especially in the environment where sulfide is used
Resistance to hydrogen fluoride corrosion: uranium oxidation to hexafluoride
Resistance to chlorine gas, hydrogen chloride, oxygen and carbonation corrosion: vinyl chloride monomer production
Thermocouple tubes in eroded gas
Jet engine components, the reignition components of the turbojet engines
Other parts used at high temperatures